15" LCD Monitor with Capacitive Touch Screen for Computer Display

• Customization: Available
• Screen Size: 15"
• Application: Indoor, Advertising, Outdoor
• Model NO.: COT150-CFF03
• Feature: Touch Display
• Optimum Resolution: 1024x768
• Type: TFT
• Widescreen: Not Widescreen
• Response Time: 6ms
• 3D: Not 3D
• Interface Type: HDMI
• Certifications: Ce, FCC
• Interface: USB
• Touch Point: 10 Touch Points
• Color: Black Frame
• Monitor Port: VGA, DVI
• Brightness: 300(CD/M2)
• Resulution: 1024*768
• Contrast: 1500:1
• Viewing Angle (V/H): 89°/89°
• Response Time(Rising): 6ms
• Transport Package: One Unit in One Carton/2 Units in One Carton
• Specification: total 6kg for one unit touch monitor
• Trademark: Thinktouch
• Origin: China(Mainland)
• HS Code: 8528591090
• Production Capacity: 200units/Week

Product Description

Product Description

15"Projected Capacitive Touch Multi Touch Monitor with VGA ,DVI  and HDMI Waterproof and Vandalproof
 

1. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.
2. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
3. Keep this equipment away from humidity.
4. Put this equipment on a reliable surface during installation. Dropping it or letting if fall may cause damage.
5. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
7. Position the power cord so that people cannot step on it . Do not place anything over the power cord.
8. All cautions and warnings on the equipment should be noted.
9. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient over voltage.
10. Never pour any liquid into an opening. This may cause fire or electrical shock.
11. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
12. If one of the following situations arises, get the equipment checked by service personnel:
    1. The power cord or plug is damaged.
    2. Liquid has penetrated into the equipment.
    3. The equipment has been exposed to moisture.
    4. The equipment does not work well, or you cannot get it to work according to the user's Manuel.
    5. The equipment has been dropped and damaged.
    6. The equipment has obvious signs of breakage.

13. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -10ºC OR ABOVE 50ºC. THIS MAY DAMAGE THE EQUIPMENT.

Detailed Photos

 

Product Parameters

1.1 Open Frame Touch Monitor Parameters

General
Model	COT150-CFF03
Series	Water-proof and Open frame
LCD Type	15" Active matrix TFT-LCD
Video Input	VGA ,DVI and HDMI
OSD controls	Allow on-screen adjustments of Brightness, Contrast Ratio, Auto-adjust, Phase, Clock, H/V Location, Languages, Function, Reset
Power Supply	Type: External brick Input (line) voltage: 100-240 VAC, 50-60 Hz Output voltage/current: 12 volts at 4 amps max
Mount Interface	1)VESA 75mm and 100mm 2)Mount bracket, horizontal or vertical
LCD Specification
Active Area(mm)	304.128(H)×228.096(V)
Resolution	1024×768@75Hz
Dot Pitch(mm)	0.297×0.297
Nominal Input Voltage VDD	+3.3V(Typ)
Viewing angle (v/h)	89°/89°
Contrast	1500:1
Luminance(cd/m2)	300
Response Time(Rising)	2ms/6ms
Support Color	16.2M
Backlight MTBF(hr)	50000
Touchscreen Specification
Type	Cjtouch Projected Capacitive touch screen
Multi touch	10points touch
Touch Life Cycle	10 millions
Touch Response time	8ms
Touch System Interface	USB interface
Power consumption	+5V@80mA
External AC Power Adapter
Output	DC 12V /4A
Input	100-240 VAC, 50-60 Hz
MTBF	50000 hr at 25°C
Environment
Operating Temp.	0~50°C
Storage Temp.	-20~60°C
Operating RH:	20%~80%
Storage RH:	10%~90%

1.2 Components

USB Cable 180cm*1 Pcs,
VGA /HDMI Cable 180cm*1 Pcs,
Power Cord with Switching Adapter *1 Pcs, 
Bracket*2 Pcs

1.3 OSD Control
1.3.1OSD buttons

1.3.2 Adjusting with OSD control
Five different keys are well-defined for operation . They are labeled on the keypad.

1. [Power] Key is designated for Power On/Off
2. [Menu] Key is designated for Menu/Enter function depending on the selected item. Pressing [Menu] can invoke OSD menu. After that, [Menu] is also an entry key.
3. [+] key is designated for selection function in up direction in OSD menu and also to increase the value on selected function,Directly use + Key is to increase brightness.
4. [-] key is designated for selection function in down direction in OSD menu and also to decrease the value on selected function,Directly use - Key is to decrease brightness.
5. [AUTO] key is designated for invoking AUTO ADJUST function at any time once is pressed for H-position, V-position, Pixel Clock and Phase for an optimal image.

1.4 Setup the driver

1. Plug and play USB port under win 7 win 8 win 10.For Andriod and Linux need using driver pls contact the sales for support.

1.5 Warranty 
1 Year Free Warranty for Monitor and all components.



1.6 Mechanical Drawing








1.7 Mounting guide
1. Build 16 screw studs along the four sides of the cut out opening based on the dimension given on the drawing above.
2.Tighten the screw stud with hex nut and make sure it is stable.

1.8 Electrical Block Diagram
The LCD touch monitor is constructed based on steel open frame architecture. It consists of a 15" LED panel, an DC to AC inverter board to support a set of cold cathode fluorescent light, an analog to digital converter board (AD Board) to convert analog RGB signals to digital ones, and a touchscreen used as a pointing device. A metal chassis supports the whole module.

1.8.1 Block Diagram



2 Solutions to Common Problems 

Problem	Suggestion(s)
The monitor does not respond after you turn on the system	1)Check that the monitor's Power Switch is on. 2)Turn off the power and check the monitor's power cord and signal cable for proper connection.
Characters on the screen are dim	Refer to the About Touch monitor Adjustments section to adjust the brightness.
The screen is blank	1)During operation, the monitor screen may automatically turn off as a result of the Power Saving feature. Press any key to see if the screen reappears. 2) Refer to the About Touch monitor Adjustments section to adjust the brightness.
Screen flashes when initialized	Turn the monitor off then turn it on again.
"Out of Range" display	Check to see if the resolution of your computer is higher than that of the LCD display.Reconfigure the resolution of your computer to make it less than or equal to 1920×1080. See Appendix A for more information on resolution.
Touch doesn't work	Make sure the touch cable is securely attached at both ends.

3 Typical Application
Gaming/Casino Systems
Outdoor and indoor Kiosks
Entertainment
Transport and Ticketing
Hospitality
Banking
Customizsed Solutions

 

Certifications

 

Packaging & Shipping

Company Profile

Dongguan CJTouch Electronic Co., Ltd. is a leading provider of Touchscreen, Touch monitor and All-in-one computers. Established in 2009 and headquartered in Dongguan, China, CJTouch has proven to be reliable and trustworthy partners to help seamlessly integrate our products into your total solution.
 Over 10 years of combined experience in researching and developing touch-enabled screens and monitors.
 Two factories with over 200 skilled and qualified employees, including R & D engineers, technical experts and sales representatives.
Production workshop

What We can offer
 IR touch screen/Frame
 SAW touch screen
 PCAP touch screen panel
 4wire/5wire resistive touch screen
 PCAP/NANO touch foil/film
 PCAP flat screen touch monitor
 SAW touch screen monitor
 IR Open frame touch display
 Desktop touch monitor
 Desktop all in one touch PC
 PCAP all in one touch computer
 Bar lcd panel
 High brightness advertising player/advertising machine
 Curved touch display
 Full bonding TFT lcd panel with touch screens
 Touch monitor with mirror
 OEM/ODM/Customization